Kanoon's Sketches

Hello, I'm back *0*

It was expected that the flood would arrive to my house. At the day I arrived (yesterday midnight) my family needed to change car to a bigger ones so that we could pass through the flood and reached home safely. The water on the road in front of my house's soi is now 20cm high and may increases everyday. Hope the situation will be fine soon, I want to go out and buy new sketchbook XP


Sketch:

 Here is the 1st sketch that I had drawn and made a mock-up last time.

 This sketch, I got the idea from spray bottle itself. The spray has 2 main parts which one of the parts is a container and 2 of them are connected by a plastic tube. So that the bigger part that attached to the bottle is acted like a (real) contained, and the smaller box is worked as a leaked-water receiver.

The mock-up is changed a little bit, from making hole at the side wall to the top instead.

The 2nd sketch is developed from the first one by removing the tube and letting the top of the container be receiver itself. What is special is the top-piece will slope down to a hole to let water run into it easier, and also enlarge it to be able to catch a possible water that may run under the handle.

 The 3rd sketch is also a continued work from 2nd sketch, by thinking of "...the leak of the container for the leak of container for the leak of the con..."

 It is, like, a 3-level of containers that contain the leak of the upper ones, from the spray (and sometimes its handle) to the 1st container to the 2nd container and then finally the 3rd container.